磨砂卡

磨砂卡表面如細沙,有顆粒狀的手感,亮而不滑,樸實而不失質感,比起傳統紙卡更好。

 

產品簡介:

• 85.5x54mm 為卡片標準尺寸 

• 可單面 / 雙面印刷

• 以上紙質只可以印刷(CMYK)單色而非專色

• 以上紙質不可做燙工以外任何加工 

• 貨期為7-10個工作天 (不包括加工項目、以確稿後當天起計) 

 

 

最低 HK$398.00

• 檔案需是清晰JPEG / PDF /AI 檔

• JPEG 檔色彩色彩模式必須為CMYK (不設RGB或其他模式顏色印刷) 

• 檔案內必須含有3mm的出血位,如沒有出血位,成品將有機會細於所需要尺寸。 

• 檔案內所有的文字必須建立外框(轉曲)及清除所以多餘的文字雜點或圖層。 

• 檔案尺寸需自行調教好所需要的正確成品尺寸 

• 字型及線條的粗幼度必須為0.2mm以上才可以印出 

• 檔案內所有色塊的色值不可以低於10%,透明度不可少於20%,否則顏色會有機會因太淺而無法印出。 

• 數碼印刷只可印刷CMYK,金色/銀色/白色將無法於印刷後呈現。 

• 顏色基於印刷色,顯示屏顏色只供參考,不能作準。 

• 數碼印刷及柯式印刷顏色或細緻程度均有差異。

 

• The file must be a high resolution of JPEG / PDF /AI format. 

• The color mode of JPEG files must be CMYK (Do not have RGB or other mode color printing) 

• The file must be include a 2-3mm bleeding area. If there is no bleeding , the finished product will be little bit than the required size. 

• All text in the file must be outlined (transformed) and all redundant text noise or layers must be removed. 

• The file size needs to be adjusted by yourself to the correct finished product size required. 

• The thickness of the font and line must be 0.2mm or more before it can be printed, and the font size must not be less than 6pt, otherwise it will not be printed. 

• The color value of all color blocks in the file must not be less than 10%, and the transparency must not be less than 20%, otherwise the color will be too light to be printed. 

• Digital printing only can print CMYK, gold/silver/white will not appear after printing. 

• Color production is based on the printing colors.The display on screen may not be accurate. 

• Digital printing and offset printing color or degree of detail were different.

WA button WA button
To Top